Youngpro takes 3DMark01 World Record!!
Yesterday I fired up the 9650, Foxconn Blackops x48 and 9800gx2, the results were very pleasing. My main benching goal has been achieved, the 3dmark01 world record!
System:
9650 @ 5820mhz (445 * 13) with Astra @ -140
Corsair Dominator pc14400 rams @ 895 6-6-3-5-16 1T
Foxconn Blackops X48 @ PL6
Foxconn 9800GX2 with Tek9 4.0 @ 1015 core, 2370 shader, 1050 rams
Silverstone 1000OP
3DMark01 Validation
Id really like to thank Foxconn for all their support, the blackops is certainly an impressive motherboard. I’d also like to thank Gigabyte, even though this score wasnt done on a Gigabyte board, they have done alot for me aswell! Their new board will sure be this exciting too!
Foxconn Dreadnought next for 3d01 sli!
T_M Does 3DMark Single Card Damage
T_M’s second session with an nVidia 9800GX2 on LN2, and is pretty happy in general with the first set of full 3D suite results.
GPU clocks vs OCP was a constant battle, with ‘06 able to do significantly higher clocks than the rest at the same temp and volts.
With only 30L LN2 no time was wasted to get the full set of tests covered, so none are particularly optimised (definately not ‘01 heh).
System
Intel QX9770 on LN2 (Astra pot) @ -140C to -165C
Gigabyte GA-X48T-DQ6 (F4 Bios) with Vcore mod
Gigabyte 9800GX2 on LN2 (XFX Bios, Tek9 4.0) VGPU/VMem/Cap mods
Patriot 1866MHz DDR3 @ 2.25V
Western Digital WD5000AAKS SATA
Windows XP SP2 general benching install
NVidia 174.88 Driver
Results
3DMark’06 – 29661 (#2 hwbot) || 3DMark’05 – 36544
3DMark’03 – 93726 (#1 hwbot) || 3DMark’01 – 107419
dinos22 fighting to reach the magic 6GHz OC with E8500 (47MHz short)
Test Configuration:
Asus P5B DLX DDR2 Motherboard (1226 bios)
(FULLY VMODDED)
**1.87vcore, 2.58vdimm, 1.71vMCH, 1.8vSB**
i have a bad OVP at 1.89vcore 
Intel Core2 Duo E8500 Q740Axxx
(-126C to -129C idle temperatures)
2GB DDR2 Crucial Ballistix
PCI GFX Card MX200
620W Corsair PSU
Stock heatsink on NB
kingpin F1 Extreme Edition CPU LN2 Pot
Big mamma 35L LN2 Dewar
160GB PATA
Windows XP Pro 32bit
……………to be continued 
